Multi-parameter water quality analyzer
●Compact, integrated design for easy installation, reduced size, and lower transportation costs.
●User-friendly touchscreen operation requiring minimal training; daily maintenance completes in 5 minutes.
●Independent wastewater/liquid separation channels with verification, supporting dynamic control technical requirements.
●Built-in 220V AC pump control interface (no external relay required).
●Door opening time and count logging functionality.
●Leak detection, optional reagent management, and reagent refrigeration capabilities.
●Automatic alarm output for abnormal or exceeding standard measurement results.
●Timed cleaning and measurement functions; automatic post-measurement cleaning of processing units, pipelines, valves, etc.
●Multiple signal outputs: 4-20 mA, RS485/RJ45.
●Manual, timed, and automatic calibration modes, including external trigger calibration; configurable calibration intervals.
●Self-diagnostic functions, power failure protection, and automatic recovery upon power restoration.
●Robust data processing and storage, retaining raw data and operation logs for over 1 year.
Parameter |
Technical Specifications |
Measurement Method |
Diphenylcarbazide Spectrophotometric Method |
Measurement Range |
0–1 mg/L; 0–5 mg/L; 0–25 mg/L (customizable with automatic range switching) |
Accuracy |
≤0.005 mg/L (Cr ≤0.10 mg/L); ≤5% (Cr >0.10 mg/L) |
Zero Drift |
±5% F.S |
Span Drift |
±5% F.S |
Detection Limit |
≤0.001 mg/L |
Precision |
≤5% |
Color/Turbidity Compensation |
User-selectable turbidity compensation based on water quality conditions |
Spike Recovery Rate |
90%–110% |
Measurement Cycle |
≤30 minutes |
Smart Features |
Auto-Calibration: Online auto-calibration and verification |
Auto-Cleaning: Pre/post-measurement cleaning; deep cleaning mode with customizable cycles |
|
Power Recovery: Automatic restart after power failure |
|
Dimensions |
380 × 310 × 550 mm (W × D × H) |
Weight |
16 kg |
